The customer in Algeria found us through the recommendation of the local customer and asked for the price of the mixer truck. After further communication with the customer, we understand that the customer is used for engineering construction. We recommended 14 CBM SINOTRUK HOWO 400HP Cement Tanker Truck to the customer. The truck is very suitable for the customer to use in the local market, and it is the configuration needed by the local market. The customer is also very satisfied with our recommendation, and paid the deposit soon after, and the factory has already started the production.
The SINOTRUK cement tanker truck uses WEICHAI engine and is equipped with a special axle for SINOTRUK, which is highly efficient and has a reasonable power chain. Through a series of lightweight designs such as aluminum alloy transmission, aluminum alloy fuel tank, aluminum alloy air reservoir, and few leaf springs, the weight is reduced. The entire vehicle is on average 0.5 to 0.8 tons lighter than similar products. The airbag cab suspension using German MAN technology effectively reduces cab vibration and reduces driving fatigue.
The hydraulic transmission system of the HOWO cement tanker truck is a system that converts hydraulic energy and mechanical energy into each other. The hydraulic pump is connected through the transmission shaft and the chassis engine power take-off to convert mechanical energy into hydraulic energy. After the high-pressure oil enters the motor, it converts the hydraulic energy into mechanical energy. , the output mode is the high-speed rotation of the output shaft of the hydraulic motor, thereby driving the cylinder filled with concrete to rotate and realizing the function of the cylinder.
Regarding the maintenance of mixer trucks: Replace pipeline sealing gaskets in advance. Rubber products tend to accelerate aging in high temperature environments, and the working environment of concrete mixer trucks is relatively harsh. Therefore, the pipelines should be checked in advance before work and the sealing gaskets should be replaced in time to avoid oil leakage, oil leakage and other failures. Pay attention to check the reducer. When replacing the gear oil of the reducer, check the internal gear of the reducer at the same time and judge whether cleaning is needed based on the usage. This will help increase the service life of the reducer.